Introduction
Version control
*ACTIVATE_ELEMENTS
Activation and deactivation of elements
Strength of elements prior to activation
*ADD_MASS
Rotating discs
*BC_MOTION
Activation and deactivation
Prescribed rotational motions
Prescribed translational motions
Rotational constraints in local coordinate systems
Rotational constraints in the global coordinate system
Translational constraints in a local coordinate systems
Translational constraints in the global coordinate system
*BC_PERIODIC
Cyclic symmetry
*BC_SYMMETRY
Rigid wall
Symmetry in local coordinate systems
Symmetry in the global coordinate system
*BC_TELEPORT
Displacements and velocities in the global coordinate system
Multiple teleportations using trigger function
Rotations in a local coordinate system
*BC_TEMPERATURE
All features
One-dimensional heat conduction
*CHANGE_P-ORDER
Cantilever beams
Domain of higher order elements
Higher order elements
*COMPONENT_BOLT
Defined in global and local coordinate systems
Positioning with table
*COMPONENT_BOX
Defined in global and local coordinate systems
*COMPONENT_BOX_IRREGULAR
Defined in global and local coordinate systems
*COMPONENT_CYLINDER
Defined in global and local coordinate systems
*COMPONENT_PIPE
Defined in global and local coordinate systems
*COMPONENT_REBAR
Bending
Defined in global and local coordinate systems
*COMPONENT_SPHERE
Defined in global and local coordinate systems
*CONNECTOR_DAMPER
Axially loaded damper
*CONNECTOR_GLUE_LINE
Combined stress
Normal stress
Shear stress
*CONNECTOR_GLUE_SURFACE
Combined stress
Normal stress
Shear stress
*CONNECTOR_RIGID
Connection in motion
*CONNECTOR_SPOT_WELD
Combined stress
Normal stress
Shear stress
*CONNECTOR_SPOT_WELD_NODE
Normal stress
*CONNECTOR_SPR
Combined stress
Normal stress
Shear stress
*CONNECTOR_SPRING
Intrinsic operations (dnorm, dnorm min, dnorm max)
Linear springs
Nonlinear springs
*CONTACT
Contact and friction forces between all element types
Continue from state-file
Expanding spheres
Friction work to heat
Newtons cradle
Vickers hardness test
*CONTACT_ACCURACY
Accuracy edge
Accuracy level
*CONTACT_REBAR
*COORDINATE_SYSTEM
Position
*COORDINATE_SYSTEM_CYLINDRICAL
*COORDINATE_SYSTEM_FIXED
*COORDINATE_SYSTEM_FUNCTION
Coordinate system defined with functions
*COORDINATE_SYSTEM_NODE
*CURVE
*DEFINE_ELEMENT_SET
Change element type in impact zone
*ELEMENT_SHELL
Contact
Volume and mass verification
*ELEMENT_SOLID
Higher order elements
Linear elements
*END
*EOS_GRUNEISEN
Shock wave test
*FREQUENCY_CUTOFF
Testing LOAD DAMPING - Mass damping
Testing MAT METAL - Quasi-static yield stress
*FUNCTION
Basic functions
Reaction force from BC MOTION
Smooth translations
*GEOMETRY_BOX
*GEOMETRY_COMPOSITE
Bc motion
Load thermal surface
Pressure loading
*GEOMETRY_EFP
Particle count
*GEOMETRY_PART
*GEOMETRY_PIPE
*GEOMETRY_SEED_COORDINATE
*GEOMETRY_SEED_NODE
*GEOMETRY_SPHERE
*INCLUDE
Offset
Test 1
*INCLUDE_BINARY
*INITIAL_DAMAGE_RANDOM
*INITIAL_DAMAGE_SURFACE_RANDOM
Surface with random initial damage
*INITIAL_MATERIAL_DIRECTION
Test 1
*INITIAL_MATERIAL_DIRECTION_PATH
Material fiber direction split
Test 1
*INITIAL_MATERIAL_DIRECTION_VECTOR
Test 1
*INITIAL_MATERIAL_DIRECTION_WRAP
Test 1
*INITIAL_PLASTIC_STRAIN_FUNCTION
Multiple initial plastic strains
*INITIAL_STATE_HAZ
*INITIAL_STATE_WELDSIM
*INITIAL_STRESS_STATE
Test 1
*INITIAL_THICKNESS
Multi-step forming
*INITIAL_VELOCITY
*LOAD_AIR_BLAST
Diffraction
Incident pressure
Reflection
Reflective pressure
Underpressure
*LOAD_CENTRIFUGAL
*LOAD_DAMPING
Different element polynomial order
Mass damping
Viscous damping
*LOAD_FORCE
*LOAD_FORCE_INTERACT
Magnetic field
References
*LOAD_GRAVITY
Gravity test
Mass scaling (include and exclude added mass)
*LOAD_PRESSURE
Load in part geometry
Load on rigid body
Load on surface
*LOAD_SHEAR
*LOAD_THERMAL_BODY
*LOAD_THERMAL_RADIATION
Cooling plate
Interaction test
*LOAD_THERMAL_SURFACE
*LOAD_UNDEX
Geers Hunter
*MAP
Pressure loaded panel
*MAT_BERGSTROM_BOYCE
Network A
Network A and B (alternative 2)
*MAT_CABLE
Failure model
Fiber stiffness
*MAT_CERAMIC
Crushing damage
Direction of plastic flow
Pressure-volume relationship
Spalling damage
Yield and failure surface
*MAT_CONCRETE_2018
Compaction curve
Crushing damage
Uniaxial tests
Viscous damping
*MAT_CREEP
Elastoplasticity
Viscoelasticity
*MAT_ELASTIC
Linear elasticity
Non-linear elasticity
Non-linear elasticity with damping
*MAT_FABRIC
Dynamic viscocity
Fiber properties
Matrix properties
Non-linear bulk stiffness
*MAT_FLUID
Pressure with cap
Shear resistance
*MAT_FOAM
Revision test
*MAT_FORMING
Initial backstress
Isotropic and kinematic hardening
*MAT_FORMING_R
Damage softening
Isotropic and kinematic hardening
R-values
*MAT_GRANULAR_CAP
Compaction curve
Damage
Damage cut-off criterion
Yield surface
*MAT_HSS
Dynamic softening
Strength differential and rate parameters
Temperature dependent elasticity
Viscosity
Yield stress
Yield surface
*MAT_JC
Quasi-static yield stress
Strain rate effect
Thermal softening effect
*MAT_JC_FIELD
Damage and failure criterion
Quasi-static yield stress
Strain rate effect
Thermal softening effect
*MAT_JH_CERAMIC
Damage, yield surface and failure surface
Direction of plastic flow
Pressure-volume relationship
Yield and failure surface
*MAT_METAL
Damage softening
Isotropic and kinematic hardening
Quasi-static yield stress
Strain rate effect
Thermal softening effect
Yield surface
*MAT_MMC
Damage
Direction of plastic flow and bulking cap
Strain rate effects
Viscous damping
Yield and failure surface
*MAT_MOONEY_RIVLIN
Elasticity
Visco-elasticity
*MAT_MULTILAYER_ORTHOTROPIC
Elasticity (Youngs moduli and Poissons ratios)
Elasticity (shear moduli)
Fiber failure criteria
Strain rate effects
*MAT_ORTHOTROPIC
Elasticity (Youngs moduli and Poissons ratio)
Elasticity (shear modulus)
Fiber failure criteria
Viscous damping
*MAT_POWDER_BURN
Interior ballistics
*MAT_REBAR
Bending stiffness
Damage
Max shear stress
Strain rate effect
*MAT_RIGID
density
*MAT_VISCO_PLASTIC
Non-linear elasticity
Plasticity
Viscosity
*MAT_ZA
BCC
FCC
*MERGE
All element types
Parallelism
*MERGE_DUPLICATED_NODES
*MERGE_FAILURE_COHESIVE
Normal stress
Shear stress
*MERGE_FAILURE_FORCE
Failure exponents
Shear and tensile failure
Shear failure
Tensile failure
*NODE
*OUTPUT_CONTACT_FORCE
Two colliding spheres
*OUTPUT_ELEMENT
*OUTPUT_FORMING
*OUTPUT_NODE
*OUTPUT_SECTION
Section radius
Simply supported beam central load
*OUTPUT_SENSOR
*OUTPUT_SENSOR_THICKNESS
Components with varying thickness
Control rolling process with thickness sensor
*OUTPUT_USER_COLLECTION
Deforming metal ring
Revolving bar
*PARAMETER
*PARAMETER_DEFAULT
Parameter order
*PART
Element erosion
Smoothing
*PARTICLE_DOMAIN
Binomial distribution
Convergence test
*PARTICLE_DOMAIN_CLEANUP
Deactivate particles
repeat parameter
*PARTICLE_HE
Static overpressure
*PARTICLE_SOIL
Sand slug impact
*PATH
Impetus module
*PETRIFY
Bouncing ball with petrify
Bouncing ball without petrify
*PRESTRESS_BOLT
Bolt assembly
Double bolt
Single bolt
*PROP_DAMAGE_BRITTLE
Criterion test
*PROP_DAMAGE_CL
Brittle criterion test
Ductile criterion test
*PROP_DAMAGE_CL_0_45_90
Criterion test (global coordinate system)
Criterion test (local coordinate system)
*PROP_DAMAGE_CL_ANISOTROPIC
Criterion test (global coordinate system)
Criterion test (local coordinate system)
*PROP_DAMAGE_CL_REGULARIZE
Regularize feature
*PROP_DAMAGE_HC
Brittle criterion test
Ductile criterion test (triaxiality, Lode parameter and thermal dependency)
*PROP_DAMAGE_IMP
Criterion test
*PROP_DAMAGE_IMP_ISO
Criterion test
*PROP_DAMAGE_JC
Criterion test (minimum failure strain)
Criterion test (triaxiality, strain rate and thermal dependency)
*PROP_DAMAGE_STRAIN
Criterion test
*PROP_SPOT_WELD
PROP SPOT WELD
*PROP_THERMAL
*REDISTRIBUTE_MESH_CARTESIAN
Polynomial and exponential mesh redistribution
*REFINE
*REMAP
Elastic rod
*RIGID_BODY_ADD_NODES
Rigid box guiding beam
*RIGID_BODY_DAMPING
*RIGID_BODY_INERTIA
Rolling cylinders
*RIGID_BODY_JOINT
Test 1
Test 2
Test 3
*RIGID_BODY_MERGE
*RIGID_BODY_UPDATE
Curvlinear update
Linear update
*SCRIPT_PYTHON
Control time and output
*SCRIPT_PYTHON_CODE
Function
*SET_ELEMENT
Multi-functionality test
*SET_FACE
Multi-functionality test
*SET_GEOMETRY
Multi-functionality test
Pressure with geometry set
*SET_NODE
Multi-functionality test
*SMOOTH_MESH
Rigid plate
csysid
*SMS
*SMS_CLUSTER
*SUBDIVIDE_PART_THICKNESS
Absolute face sheet thickness
*TIME
Maximum allowed mass scaling factor
Maximum and minimum time step size
Termination time and time step size
*TRANSFORM_MESH_CARTESIAN
Rigid elements
*TRANSFORM_MESH_CYLINDRICAL
Rigid elements
*UNIT_SYSTEM
Conversion between unit systems
Mass, time, length of all unit systems
*VELOCITY_CAP
AIR and HE
Nodes
SOIL and SPH
*WELD
Step 1, Generate weld
Step 2, Verify weld
Verification - Input Commands
Version: 8.0.368 - February 28, 2023
