Revision list

List of revisions

2024-03-12 8.1.726 Added *FRAGMENT_CLEANUP. Updated *PARTICLE_SPH_JET and *COORDINATE_SYSTEM.
2024-02-13 8.1.699 Added to intrinsic operations manual: vmax_dp, vmax_cfd, vmax_p, asin, acos, atan, asinr, acosr, atanr, epsxxs, epsyys, epszzs, sigxxs, sigyys, sigzzs, sgps, sph_jet and dmg_es.
2024-02-01 8.1.693 Added *PROP_DAMAGE_GOLDTHORPE.
2023-11-23 8.1.666 Added *MAT_UNDETONATED_EXPLOSIVE. Updated *MAT_REBAR, *MERGE, *PARTICLE_DOMAIN, *CFD_SOURCE, *LOAD_DAMPING, *LOAD_UNDEX and *MAT_HSS.
2023-09-28 8.1.603 Updated *CFD_HE.
2023-09-14 8.1.600 Added *BOLT_FAILURE and *CFD_SOURCE.
2023-06-16 8.0.497 Added *INITIAL_DISPLACEMENT, *OUTPUT_DEBUG and *PROP_DAMAGE_CL_0_45_90_REGULARIZE.
2023-02-27 8.0.368 Added *MAT_FABRIC_ISOTROPIC, *VAA, *CFD_DOMAIN, *CFD_GAS, *CFD_HE and *CFD_DETONATION.
2022-11-24 7.0.279 Updated the format of *MAT_MM_CONCRETE.
2022-11-10 7.0.252 Added *BC_PERIODIC, *OUTPUT_DAMAGE_MAP and *INITIAL_DAMAGE_MAP.
2022-09-16 7.0.154 Added *MAT_MM_CONCRETE.
2022-08-26 7.0.121 *MAT_CONCRETE_2017, *MAT_CONCRETE_2018, *MAT_CONCRETE_2021, *MAT_BERGSTROM_BOYCE marked as deprecated.
2022-03-22 7.0.22 Added *PARTICLE_SPH_JET_LSC.
2022-03-07 7.0.1 Added *FREQUENCY_CUTOFF.
2022-01-04 6.0.900 Added *DEFINE_ELEMENT_SET.
2022-01-03 6.0.899 Added *MAT_BB.
2022-01-03 6.0.899 Added *MAT_YEOH.
2021-12-22 6.0.880 Added *CHANGE_PART_ID.
2021-11-30 6.0.869 Added *MAT_MMC_OST.
2021-08-05 6.0.826 Added *COUPLING_REBAR.
2021-08-05 6.0.796 Added *LOAD_UNDEX.
2021-08-05 6.0.796 Added *LOAD_THERMAL_RADIATION.
2021-03-05 6.0.680 Added *PETRIFY.
2021-02-11 6.0.649 Added *GEOMETRY_COMPOSITE.
2021-02-11 6.0.649 Added *OUTPUT_CONTACT_FORCE.
2021-02-09 6.0.646 Added *CONTACT_ACCURACY.
2021-02-05 6.0.643 Added *INITIAL_MATERIAL_DIRECTION_PATH.
2020-11-30 6.0.581 Added *OUTPUT_ERROR.
2020-11-23 6.0.581 Added *LOAD_FORCE_INTERACT.
2020-10-26 5.0.554 Added *BC_TELEPORT.
2020-10-25 5.0.553 Added *PARTICLE_SPH_JET.
2020-09-11 5.0.509 Added *PARTICLE_DOMAIN_CLEANUP.
2020-09-11 5.0.509 Added *INITIAL_PLASTIC_STRAIN_FUNCTION.
2020-09-01 5.0.503 Added LX-14-0 in *PARTICLE_HE.
2020-08-28 5.0.501 Added *VULNERABLE_AREA_ASSESSMENT.
2020-08-13 5.0.482 Added *MAT_POWDER_BURN and *POWDER_BURN_IGNITE.
2020-05-13 5.0.395 Added *COORDINATE_SYSTEM.
2020-05-11 5.0.393 Added *CONNECTOR_DAMPER.
2020-04-23 5.0.358 Added *PARAMETER_DEFAULT and *PARAMETER_LOCAL.
2020-04-14 5.0.358 Added *COORDINATE_SYSTEM_FUNCTION.
2020-03-03 5.0.300 Updated *PROP_DAMAGE_HC.
2020-02-17 5.0.264 Added *MAT_MMC.
2020-01-06 5.0.233 Added *OUTPUT_SENSOR_EXTENDED.
2019-10-27 5.0.196 Added *TRIM_HOLE.
2019-09-23 5.0.169 Added *SUBDIVIDE_PART_THICKNESS.
2019-09-20 5.0.167 Added *MAT_LEE_TARVER.
2019-07-14 5.0.107 Added optional angle to *MERGE.
2019-06-28 5.0.102 Added *RIGID_BODY_UPDATE.
2019-05-19 5.0.72 Added *OUTPUT_SENSOR_THICKNESS.
2019-04-03 5.0.33 Updated *OUTPUT_USER.
2019-03-29 5.0.28 Added *SCRIPT_PYTHON.
2019-03-18 5.0.9 Added activation/deactivation option to *BC_MOTION.
2019-03-16 5.0.8 Added *OUTPUT_J_INTEGRAL.
2019-03-14 5.0.3 Added accuracy option to *CONTACT.
2019-02-19 4.0.2615 Added *OUTPUT_USER_COLLECTION.
2019-02-11 4.0.2608 Added *OUTPUT_SECTION.
2019-01-10 4.0.2583 Added *MAT_CONCRETE_2018.
2018-10-17 4.0.2546 Added *PROP_DAMAGE_HC. Added penetration tolerance parameter and one way contact flag to *CONTACT.
2018-10-13 4.0.2541 Added *MAT_HSS.
2018-10-10 4.0.2521 Added *MAT_OBJECT.
2018-08-15 4.0.2517 Added *COMPONENT_BOX_IRREGULAR.
2018-07-05 4.0.2491 Added optional geometry to *SMOOTH_MESH.
2018-05-31 4.0.2480 Added viscous decay coefficient to *MAT_CONCRETE.
2018-04-06 4.0.2441 Added parameter for definition of sharp edges to *CONTACT.
2018-03-16 4.0.2420 Added hysteresis parameter to *MAT_VISCOUS_FOAM.
2017-12-08 4.0.2339 Added viscosity parameter to *MAT_FABRIC.
2017-12-01 4.0.2315 Added one more parameter to the *GEOMETRY_EFP definition.
2017-11-02 4.0.2315 Added *MAT_VISCOUS_FOAM, a model for visco-elastic foam materials.
2017-10-02 4.0.2289 Added support for element sets (ES) in *ACTIVATE_ELEMENTS and for geometries (G) in *MERGE. Added intrinsic function for maximum damage in an element set (dmg_es). Clamped boundary condition for SPH particles in *PARTICLE_DOMAIN.
2017-08-21 4.0.2274 Added *MAP, a command that is used to define data points in a cartesian grid.
2017-08-09 4.0.2272 Modified rate effects in *MAT_CONCRETE.
2017-08-08 4.0.2271 Modified yield criterion and damage model in *MAT_CERAMIC.
2017-05-29 4.0.2216 Added *MAT_FABRIC, a model for fabrics and fiber composites.
2017-05-19 4.0.2204 Added *LOAD_AIR_BLAST, a command for air blast loading of rigd and deformable structures.
2017-03-16 4.0.2156 Added built in high explosive types ANFO, PBXN-110 and MCX-6100 to *PARTICLE_HE.
2017-03-16 4.0.2122 Added an option to *OUTPUT for deactivation of discrete particle output.
2017-03-10 4.0.2102 Added *CONNECTOR_SPOT_WELD, a command for definitions of spot welds.
2017-03-10 4.0.2102 Added *CONNECTOR_GLUE_LINE, a command for adhesively bonded surfaces.
2017-03-09 4.0.2100 Added *TABLE, a command for definition of tabulated data.
2017-03-09 4.0.2100 Added *PATH, a command for definition paths in space.
2017-03-07 4.0.2096 Added support for title in *INCLUDE.
2017-02-17 4.0.2090 Added irregularization parameters to ductile damage models.
2017-02-16 4.0.2089 Added *VELOCITY_CAP, a command that defines an upper velocity limit for nodes and discrete particles.
2017-02-03 4.0.2081 Changed document version to 4.0.
2017-01-19 4.0.2067 Added *RIGID_BODY_ADD_NODES, a command that constrains nodes in deformable parts to a rigid body.
2017-01-17 4.0.2062 Added *OUTPUT_USER, a command for user defined ASCII output.
2016-12-15 4.0.2033 Added *ADD_MASS.
2016-12-05 4.0.2023 Added *PRESTRESS_BLIND_HOLE_BOLT.
2016-11-15 3.0.1996 Added deactivation time to *PARTICLE_DOMAIN.
2016-09-29 3.0.1959 Equation-of-state (optional) can now be referenced directly in the material command.
Added flag to switch between local and global displacement output in *OUTPUT_SENSOR.
Added user defined high explosive and soil to *PARTICLE_HE and *PARTICLE_SOIL.
2016-09-14 3.0.1947 Added damage softening option to *MAT_FORMING_R.
2016-09-01 3.0.1920 Added *PARAMETER_RANGE_CONTINUOUS, *PARAMETER_RANGE_DISCRETE and *PARAMETER_RANGE_BOOL, commands used for parameters vislualization/manipulation in the GUI.
2016-08-31 3.0.1918 Added a group of *PARTICLE commands, allowing for a flexible use of discrete particles and SPH.
2016-08-16 3.0.1907 Added *MAT_ZA (Zerilli-Armostrong) a model for metals at high strain rates.
2016-06-17 3.0.1877 Added output interval (*OUTPUT) for fragment list generation.
2016-06-14 3.0.1876 Added built in high explosive types Comp A-3, Comp B (grade A), HMX and Octol 78/22 to *PBLAST.
2016-04-20 3.0.1856 Added *MAT_BERGSTROM_BOYCE, a model for polymer and rubber materials.
2016-04-03 3.0.1846 Added option to activate bending stiffness in *MAT_REBAR.
2016-03-18 3.0.1838 Added friction torque and sliding resistance to *RIGID_BODY_JOINT.
2016-03-04 3.0.1832 Added functionality to model water in *PBLAST.
Added flag to convert eroded elements to discrete particles in *PART.
Added round(x) to list of intrinsic functions handled by the parser.
2015-12-10 3.0.1793 Added option to allow for smeared out contact impulses in *PBLAST.
Added flag to activate deformble high explosives in *PBLAST.
2015-11-02 3.0.1765 Made beta-commands visible.
2015-10-20 3.0.1757 Removed *MAT_USER_JS. We now only support DLL based user materials.
Added *MAT_CONCRETE, a new material model.
Added user defined contact stiffness and shear cap in *PSOIL.